Linux version 2.4.25 (root@vger) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Mon Mar 22 20:02:20 PST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. ACPI disabled because your bios is from 97 and too old You can enable it with acpi=force Kernel command line: auto BOOT_IMAGE=Linux ro root=302 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 453.176 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 904.39 BogoMIPS Memory: 514852k/524224k available (2086k kernel code, 8984k reserved, 438k data, 312k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 CPU0: Intel Pentium II (Deschutes) stepping 03 per-CPU timeslice cutoff: 2923.18 usecs. SMP motherboard not detected. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 453.1855 MHz. ..... host bus clock speed is 100.7078 MHz. cpu: 0, clocks: 1007078, slice: 503539 CPU0 Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfd9e8, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [8086/7110] at 00:07.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket IA-32 Microcode Update Driver: v1.13 Starting kswapd Journalled Block Device driver loaded SGI XFS with no debug enabled pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled loop: loaded (max 8 devices) ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html eth0: RealTek RTL-8029 found at 0xdc00, IRQ 10, 00:40:C7:2D:B0:A6. Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 91190D7, ATA DISK drive hdb: Maxtor 5T020H2, ATA DISK drive blk: queue c0419600, I/O limit 4095Mb (mask 0xffffffff) blk: queue c0419748, I/O limit 4095Mb (mask 0xffffffff) hdc: Maxtor 5T020H2, ATA DISK drive blk: queue c0419a6c, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 23243472 sectors (11901 MB) w/256KiB Cache, CHS=1446/255/63, UDMA(33) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 39851760 sectors (20404 MB) w/2048KiB Cache, CHS=2480/255/63, UDMA(33) hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 39851760 sectors (20404 MB) w/2048KiB Cache, CHS=39535/16/63, UDMA(33) Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > hdb: hdb1 hdb2 hdb3 hdb4 hdc: hdc1 hdc2 hdc3 hdc4 SCSI subsystem driver Revision: 1.00 usb.c: registered new driver hub host/uhci.c: USB Universal Host Controller Interface driver v1.1 host/uhci.c: USB UHCI at I/O 0xde00, IRQ 10 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected could not create /proc entry for vicam!<6>usb.c: registered new driver vicam Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. Linux video capture interface: v1.00 md: raid1 personality registered as nr 3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.8(17/11/2003) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_conntrack version 2.1 (4095 buckets, 32760 max) - 292 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 312k freed hub.c: new USB device 00:07.2-1, assigned address 2 ViCam based webcam connected vicam: could not create proc entry, root pointer is null. ViCam webcam driver now controlling video device 0 Adding Swap: 249976k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal [events: 0000000a] [events: 0000000a] md: autorun ... md: considering hdc1 ... md: adding hdc1 ... md: adding hdb1 ... md: created md0 md: bind md: bind md: running: md: hdc1's event counter: 0000000a md: hdb1's event counter: 0000000a md: RAID level 1 does not need chunksize! Continuing anyway. md0: max total readahead window set to 124k md0: 1 data-disks, max readahead per data-disk: 124k raid1: device hdc1 operational as mirror 1 raid1: device hdb1 operational as mirror 0 raid1: raid set md0 active with 2 out of 2 mirrors md: updating md0 RAID superblock on device md: hdc1 [events: 0000000b]<6>(write) hdc1's sb offset: 9472 md: hdb1 [events: 0000000b]<6>(write) hdb1's sb offset: 9472 md: ... autorun DONE. [events: 0000000a] [events: 0000000a] md: autorun ... md: considering hdc2 ... md: adding hdc2 ... md: adding hdb2 ... md: created md1 md: bind md: bind md: running: md: hdc2's event counter: 0000000a md: hdb2's event counter: 0000000a md: RAID level 1 does not need chunksize! Continuing anyway. md1: max total readahead window set to 124k md1: 1 data-disks, max readahead per data-disk: 124k raid1: device hdc2 operational as mirror 1 raid1: device hdb2 operational as mirror 0 raid1: raid set md1 active with 2 out of 2 mirrors md: updating md1 RAID superblock on device md: hdc2 [events: 0000000b]<6>(write) hdc2's sb offset: 97664 md: hdb2 [events: 0000000b]<6>(write) hdb2's sb offset: 97664 md: ... autorun DONE. [events: 0000000a] [events: 0000000a] md: autorun ... md: considering hdc4 ... md: adding hdc4 ... md: adding hdb4 ... md: created md2 md: bind md: bind md: running: md: hdc4's event counter: 0000000a md: hdb4's event counter: 0000000a md: RAID level 1 does not need chunksize! Continuing anyway. md2: max total readahead window set to 124k md2: 1 data-disks, max readahead per data-disk: 124k raid1: device hdc4 operational as mirror 1 raid1: device hdb4 operational as mirror 0 raid1: raid set md2 active with 2 out of 2 mirrors md: updating md2 RAID superblock on device md: hdc4 [events: 0000000b]<6>(write) hdc4's sb offset: 19568192 md: hdb4 [events: 0000000b]<6>(write) hdb4's sb offset: 19568192 md: ... autorun DONE. ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! EXT2-fs warning (device ide0(3,1)): ext2_read_super: mounting ext3 filesystem as ext2 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device md(9,2)) ... for (md(9,2)) md(9,2):Using r5 hash to sort names